Earth entry, connection lugs, conductor holders, test joint boxes
Earth entry rods, connection lugs and test joints for connecting the down conductor to the earthing system.
Marker for Connection Lugs
Attached to round wires or strips to make them conspicuous (as required by DIN 18014) during the construction work.Product detailsFlat Strip / Round Conductor Holders with Thrust Piece
For wall mounting.
Thrust piece with M8 screw for installing flat strips up to 11 mm and round conductors 6-10 mm.Product detailsEarth Pits and Bonding Bars
The concrete inspection pit is classfied for heavy duty usage, suitable for most types of earthing and lightning protection installations.Product detailsEarth Rod Seals
Earth Rod Seals create a watertight sealing of the Earth Rod installation, available in various sizes to acommodate our Earth Rod PortfolioProduct detailsEarth Entry Rods
For connecting down conductors to the earth-termination system.Product detailsStraightened / Angled Connection Lugs
For connecting down conductors to the earth-termination system; made of corrosion-resistant stainless steel.Product detailsRod Holders DEHNhold
For fixing air-termination and earth entry rods, with slotted saddle clamp, fixed conductor routing.
For use with different materials, e.g. Al, StSt, St/tZn and Cu.Product detailsRod Holders with Saddle Clamp and Flange
Complete unit with flange for installing air-termination and earth entry rods, fixed conductor routing.Product detailsRod Holders for External Thermal Insulation Composite Systems
Two-screw clamp with M6 screws, with flange (ZDC) and plastic plug Ø10 mm.Product detailsRod Holders DEHNfix
Two-in-one holder system (fixes the holder and the conductor), fixed conductor routing.
Only suitable for solid stone or concrete.Product detailsRod Holder with Claw
For wall mounting with M6 fixing screw, fixed conductor routing.Product detailsFIX Test Joint
With insulating piece and disconnetion lug.Product detailsUF Test Joint Boxes
For underground installation, for disconnecting the down conductor from the earth-termination system for measuring purposes.Product detailsTest Joint Boxes
For concrete construction with integrated test joint and special construction markings.Product detailsTest Joint Box for External Thermal Insulation Composite Systems
The telescopic test joint box is particularly designed for external thermal insulation composite systems (full thermal insulation).
It is continuously adjustable from 90-140 mm. Thanks to the additional spacer, the test joint box can be used for insulation material thicknesses up to 320 mm.Product detailsInspection Doors
For flush-mounted test joints.Product detailsVariable Number Plates
Test joints, down conductors and connection lugs can be marked using the variable number plate. On site, the individual pre-embossed numbers can be quickly inserted into the plate without additional tools. This ensures uniform marking.Product detailsNumber plates that can be marked
Numbers from 1 to 999 and also certain combinations, such as A01, b02, C03, d04, etc., can be created with the 7-segment number plate and the accompanying paint marker. The special black paint marker has been tried and tested over a long period of time in use with the number plate, is highly opaque, dries quickly, is weatherproof and extremely light-resistant, as well as abrasion-resistant. Other paints or pens cannot be recommended.
The number plate without pre-embossing can be used for on-site marking with punched numbers 10 mm in size.Product detailsCarrier Plate for VDB Test Badge
For attaching the test badge to the down conductor or earth entry.Product detailsTwo-Screw Clamp
With M6 thread, for combination with the ""Attention! Equipotential bonding"" sign (Part No. 480 599) or e.g. with number plates.Product details
