Touch voltage on down conductors can be prevented by using the CUI Conductor.

For installing the CUI conductor on walls or façades.

Tool for stripping the XLPE insulated CUI Conductor (outer diameter 20 mm).

• Tool consists of a handle and an exchangeable cutting heads
• Stripping length of the CUI Conductor is adjustable in steps of 0.2 mm (lock points) using the knob in the handle. The dial on the handle shows the length set.

Handling
Position the cutting head at the cut-off end of the conductor and turn clockwise applying light pressure to cut/strip it.

Sign warning of the hazard of direct lightning strikes, e.g. on park decks (without air-termination systems) or other areas.

In case of step and touch voltage hazard for living beings.
In accordance with the requirements of IEC/EN 62305-3.

Mesh mats for potential control in shelters and entrance areas.